Why are there no mixed species forests or group plantings? One factor could be that different species might compete for space between each other. Another could be the eventual problem with re-potting that you would be disturbing the roots of one tree where the timing is perfect whereas for another species it would be too soon? In either case, the spark was set off by Bonsai Mirai’s Beech forest on Tom Benda’s pot and I knew that I needed to try this year.

When you think about it, forest plantings required a substantial amount of work. Size of pot, finding the pot, can someone make it for me or do I have to get creative and drill an under tray? Where do I find such an under tray?

Rocks, where do I get rocks or stones that reflect the local geography? How do I secure them to the pot? Do I even have the tools to make this happen?

Trees, what size should the trees be since I don’t really know what the layout of the composition will be? How many should I buy? What direction should the front of the leader and secondary tree be? Where are they going to sit in the composition so I can cut some excess off allowing me to fit them in my car and allowing them to compartmentalize in the cambiem before I actually do the root work in the spring.

Can I do this alone? Do I have the drills and other tools to make this happen, what if the rootballs suck? How will I even transport this thing after it’s done if I ever move or eventually want to display it?

These are only some of the questions that were lurking around my head and 4 hours into the actual day of work, I started to question whether or not I was in over my head.

After visiting all of the nurseries here, I chose 3 stones that I thought could mesh well together. Lava rocks that seem to be mixed with something else as they are much harder than a porous, typical lava rock.

Finding a large under tray, I thought would suit the composition and play well on the stone, bark and foliage colors throughout the seasons. I also placed the rocks around to get an idea of what the entire piece could evolve into and also to mark where holes needed to be drilled along with the supports for each stone.

Then came the work on a beautiful Saturday morning. My good friend Jiri offered that I export everything I need from the balcony and bring it to his newly purchased property where I could make a mess without caring too much. I also had to purchase a diamond based holesaw to create the holes from which water could escape and oxygen exchange could take place.

Following slow and careful drilling, 3 hours later the “pot” was ready.

From this point on, there is a period of 3 separate days as I was running out of time and had other errands to run, I unfortunately was desperate to finish that I didn’t have much time to properly document all of the work and planning.

Monday afternoon and after working on my largest bonsai creation ever, with a final application of the sphagnum moss I had left (I should have been prepared with much more). I had to consider how the hell was I going to get this monster to the balcony as my car was much too small. Thankfully, another friend of mine with a handy business van helped me on Tuesday evening and the Moravian Forest was brought home after over 20 hours of work and 40+ hours of planning, searching and finding all the material.

A few weeks later, most of the trees seem to be doing fine except for a couple of the Carpinus and the main Beech tree. Beech usually open about a month after the Hornbeams so I do hope it pulls through after such a surgery.

Have a great weekend and stay fresh.

Tom

Why hello there. I’ve been busy as of late but it’s been another prolonged period without a post so here we go.

I got this tree for a great price from a local nursery in Brno called Carex. They tend to have some good evergreen pieces that are meant to be garden trees but could make interesting bonsai as well. I took a crack at such a piece.

It was re-potted this spring and it recovered quite well and therefore applying some wire and beginning the journey seemed like a good idea.

 

 

The right branch will probably go in the future but I need it now to push the tree forward, health-wise. A high Alpine tree is what I am eventually going for.

I hope you’re enjoying the fall!

T.

I apologize for not posting for such a long time. I would like to update you with some images of some of the trees that have changed a bit since how they started out.

A larch that was dig up but wasn’t too interesting. After the initial styling I wasn’t very satisfied and I thought about removing two of the structural branches. This wasn’t the decision that would improve the tree though. It was the angle and some adjustments to the styling. Now I feel that it is moving in the right direction.

Here is a very cheap and simple nursery stock Sabina juniper. For a few years I wasn’t sure what to do with it. Then it had its first repot, then first styling and trim a year later. It was left alone for some time and had another repot into what I felt to be a more suitable container in the spring of 2018. It grew freely until November 2018 when I gave it a second styling.

Here I had some fun with a request from a client, to create a tree for their significant other as a gift. Even easy to take care of Ficus trees can be made to look interesting and I was quite happy with the outcome given I didn’t have much time to prepare this tree.

Here is another tree that just hasn’t received much attention and after years in a plastic container it was re-potted spring of 2018 and was finally styled. This tree is beginning to look like a weeping tree in nature and I hope to improve it further.

This tree is also moving in the right direction and I hope to pull out more of that high-alpine, candelabra look.

We’re really looking forward to give this tree a second styling after it was re-potted into a more bonsai-style Chinese pot. It was nice to wake up and see a fresh layer of snow on this yamadori.

I’ve been enjoying the process this tree has gone through and we’re very happy with the progress in just 9 months that it has been at the balcony.

Early winter photo of the Moravian Forest. We plan on adding more trees to improve this composition, unfortunately there are almost no available Beech trees available at nurseries.

Lastly, I wanted to end with a little project over the holidays. I was inspired by Bonsai Mirai and their Christmas tree bonsai. We picked a nice Nordmann fir at a local nursery and had a great time transforming a regular Christmas tree into something that can be a nice-looking tree in a few years. Firs are awesome and remind me of home while I was working on this. I hope to dabble with more in the future.

Wishing you all the best into 2019 and I hope your trees and collections improve and grow like weeds!

T.

Howdy everyone! It’s been some time since my last post but that’s because we’ve been busy with our new family member and several other things. I’d like to take this opportunity to show some of the changes in the garden.

 

feminine yamadori hawthorn

 

 

 

 

 

 

I’ll be posting some more things soon. I hope everyone is having a great spring and enjoying everything that has woken up from winter.

Cheers

T.

 

 

Well hi there, here’s my Miyajima white pine I purchased about 4 years ago and how I’ve moved forward with it. When I first bought it, I was going for a classic design and wired and styled it out. However, the next spring revealed that the cambium separated from the sapwood.

This resulted in all of the lower and main branches to die off, leaving me with a tree that resembled a fat person holding an umbrella. Impressive trunk but no asymmetry and bonsai without symmetry is just not as interesting.

I figured that I would at least re-pot it into the front that was proposed and then we’ll go from there in terms of a new design.

A few months later I thought of keeping the bottom branch as a jin and so I tried that

I had completely fallen out of love with this tree and was lost with how to move it back into an interesting direction. The trunk was too straight as this point and I had nothing to cut back to to create some more variation within the foliage.

I decided to just let it grow as much as possible and focus on having health come first before doing any other changes.

This year during the winter I tried a few angle changes to see if that would help.

This shift seemed the best and would definitely be an improvement from the old straight trunk line of the previous design. I also got some helpful feedback from Ryan Neil regarding the new design. That new idea was to create a tesion design. Tension means that the apex/crown and main branch move against the trunk. It’s a simple design that uses angle changes to create more drama when other features are lacking. In March I went through with this new design and I also re-potted into the new angle.

Now I am proud of this tree again and I am really looking forward to where it will go from here. The design idea from Ryan was a great upgrade to the otherwise boring design. Right now it’s happily growing this years candles and in full sun.

Stay cool! And keep your trees happy!

Thomas

 

Hi there. Long time, I know. Been busy. Instead of a boring and long story here are some bonsai trees

This Common Juniper was the subject of my first public demo on the 23rd of June in Poland at the Bonsai Triennale 2019. I was really happy with the result.

Yes, bonsai was being done all year and I’ll continue to do so. See you next time.

T