This is Janice’s buttonwood. You’ve seen it before in the post Who doesn’t have a buttonwood in Florida from a few years ago. Since then, it was shown in the 2021 Bonsai Societies of Florida annual convention, and its just gotten better. Janice found a new pot for it at this year’s BSF convention (2022) and that’ll be the main work today.

Here it is now, in The Nook.

To begin the story, here are some progression pics.

Here it was in 2018.

Here it was in 2019 (at the end of this blogpost)

At the 2021 BSF Convention.

And, finally, back to today.

The tree was originally scheduled for the 2020 exhibit but, you know what happened that year. As a result, we didn’t repot it in 2020 or 2021, and this year I’ve been working on letting it gather sugars so I can do some work on it. Hence the big leaves.

It had a mild chili thrip infestation at the end of last year as well, and we treated it with imidacloprid, a systemic insecticide.

But the tree is strong now, and ready for some work.

I’ll also be cleaning and applying lime sulfur to the deadwood, which is, as you’ll see, sometimes easier when the tree is in the middle of a repot.

First step, defoliation. I know, oooooooohhhhh, controversial. It astounds me that so many professionals not only poo poo defoliation as a valid technique, but try to vilify those who use it. One of my catchphrases I use all the time is “horticulture is a science, but the practice of horticulture is an art”. That’s why two people can use two seemingly different techniques and still achieve success. Most of bonsai technique has more to do with the timing and seasonality of the technique and less to do with doing it. Here’s an example: there aren’t any arborists that suggest that removing a pine trees candles is ever a good idea. Yet, if one does it at the right time, the way we bonsai practitioners do, the tree responds with increased vigor and better growth.

There are prerequisites to de-candling a pine tree, one of them being the tree should be in good health, but the science of horticulture says “don’t do it”. Yet we do. Why? Because, the practice and timing of the technique works. As it does with defoliation.

Anyway, here’s my quick method for defoliating a buttonwood. They tend to grow like little rosettes, as below.

Take the branch…

…..move your hand to the end of the branch, holding the leaves…

…..take a sharp pair of scissors….

…..SNIP…..now, depending on whether you want to keep the grow tip intact, to continue the elongation of the branch, or you want to encourage backbudding, is what determines how close you snip the leaves off. I left the grow tip intact in this case, as you can see below.

On some, I’ll keep the tip, on others, I cut it.

Here’s something you don’t see everyday, flowers on a buttonwood. Yes they flower, everything flowers, but it’s only when you let it grow and it’s healthy do you see it.

You may notice some black sooty mold on some of the leaves.

Whenever you see it, always check for aphids or scale.

In this case, its not this tree that’s infested, it’s from a tree that was above it on the bench.

Snip, snip…

Snip, snip….

No, I didn’t count how many leaves. Ain’t nobody got time for that.

Now it’s time to repot. I would normally repot a buttonwood, in Florida, every year. It’s been my observation that the tree can weather the winter weather better if you repot yearly.

But this tree had been selected for the 2020 BSF Convention exhibit. Unfortunately, that was the year of Covid lockdowns, so the convention was cancelled, and I lost several months due to my own health problems, so that year was skipped. And the tree was shown the next year, 2021. So I skipped that year too. Sometimes getting a tree ready for exhibition can really stress a tree out.

This year is the year though. And I’m not looking forward to it. It’s potted in a container with sides that bow outward (they call it a “bag pot”). It’s a pretty design, but the roots will fill up that space, making removal a bit difficult.

But, no worries, I have my “1980’s era” repotting tool, the ubiquitous black handled, serrated, steak knife.

Before I begin sawing the tree out, I’m going to save the moss. Janice loves moss, so I’ll put it back on the soil surface when I’m done.

I got a little.

Now, let’s see how difficult it’ll be getting the tree out.

Simply saw around the perimeter, and pry the tree up every few inches.

It’s actually going kinda easy.

Ta-Da!

Now we gently rake out the roots. For a buttonwood I prefer a single tined rake or just a chopstick. The American Bonsai Tools repotting tool works well here.

It definitely needed a repot.

Before we finish, let’s look at, and get ready, the new container Janice chose.

It was created by Doug Marcum, from Hippie Dad Bonsai.

I think it’ll be perfect for the style tree, and, most importantly, Janice loves it too. It is her tree, ultimately.

The details are amazing.

He even has bent over nails made from clay, to make it look like a wooden box thrown together.

I rake out the roots and trim some back, and check to see if it fits in the new pot (you can see the process better in the post Jorge’s Buttonwood, from a few articles back).

Before I put it into the new pot, I’m going to use a wire brush to clean the deadwood (“Wire brush?” You ask, because it works. You’ll have to say that part out loud to get the joke). It’s also easier to clean the deadwood while it’s out of the pot, better to get at all the surfaces if you can turn the tree upside down.

Scrub scrub scrub.

Brush it down to bare wood, really removing all the dirt, grime, and old lime sulfur.

Then put it into the pot. I fertilized, then placed some imidacloprid to keep the chili thrips at bay, and then added that saved moss.

Then, since I’m going to lime sulfur it, I water and make sure to get the deadwood wet.

Lime sulfur needs to go on wet wood to help it penetrate deeper.

I’ve had this bottle for a while. I don’t think it’s available from the Hi-Yield company anymore, but you can get a similar sized bottle for very little money from veterinary supply companies (here’s a link, and no, I don’t do any affiliate marketing links, so I’m not getting paid to promote it: Click here you’ll notice that a big bottle, in this case 16oz, costs about the same as a 4oz bottle from bonsai sources. And it’s the same chemical, that’s your tip of the day. You’re welcome)

Get yourself a glass or ceramic, non reactive vessel, a cheap paintbrush, and paint it on.

Yes, it goes on orange, but, don’t worry, it bleaches white.

It won’t hurt the soil but it could damage the glaze on the pot, so I cover them both with a towel or newspaper.

Then I paint. Since it will flow down, being as it’s a liquid and we live in the gravity well known as “the earth” I usually start at the top and work my way down.

This is the cool part, I coat the whole surface of the deadwood, full strength btw, and it’ll look like this:

And about a half hour later, it bleaches white, quite nicely.

Now, before I finish with some wiring, I’ll speak to those that don’t like the bleached white look. First, it’s important to use lime sulfur. It is technically a fungicide, and it slows the decay. If you don’t like the white, you can add a darkening pigment, like India ink or acrylic paint, but, in a few months, the color will fade anyway, so there’s no real need to add the color unless you are showing the tree soon. Me, I don’t mind it. I think it works artistically, and Janice likes the bleached look too. But you do you, it’s your tree.

Now for a little wire and some minor pruning….

And Bob’s yer uncle.

The tree is really developing well. The branches are thickening, and developing strong ramification.

I am liking it more and more.

Today, we have a ficus microcarpa (for those who have searched through the posts, in the far past I’ve called this species ficus retusa, incorrectly. Instead of going back and fixing them all, just keep in mind that Ficus retusa is a totally different species of fig, and take it for the ever changing nomenclature that is being updated. My apologies for any confusion). It belongs to Kathrin. I had done a demo for the Shofu Bonsai Society of Sarasota many years ago, and she won it in the raffle. You’ve seen it before, in the link below.

I had meant to update this tree several times in the past few months, but didn’t get to it. Here it was in October 2021.

And, as it was in the original post:

https://adamaskwhy.com/2020/10/14/building-a-ficus-microcarpa-bonsai/

https://adamaskwhy.com/2020/10/14/building-a-ficus-microcarpa-bonsai/

I’ll wait as you step into the Way-Back Machine and travel back in time.

And, still in the past, the work we did at Kathrin’s garage, in my Sarasota Studygroup in October.

Then we went, the next day, into Wil’s garage.

First, we get rid of the Corona bottle cap I was using to hold a graft in place.

It worked pretty well, and played into my gallows-type humor at the time.

The graft took well on the main trunk.

But up top, we had trouble getting that branch to stick.

Take notice of the hole that was created from the branch, where the black wire is.

Now, back to today. Late July/early August, 2022.

I’ve had it here in Orlando for a few months. The idea was for me to bring it back the next month, but life got in the way. A few too many client’s trees to work on and a brief hospital stay made the tree sit on my bench and just grow. But sometimes that’s a good thing. It gives us something to work with. and it seems to like my yard.

The water at my nursery is good compared to Sarasota (it has to do with how we get our water in Orlando. This Post about cleaning calcium off a pot explains it a bit more)

If you compare the below pics with the older ones, you can really see how much the branches have thickened, and how we tied that one branch that refused to graft in place.

It’s finally taken, so now it’s time to remove the wire.

You can definitely see where the two trees are grafted on, but that’s ok, it’ll smooth itself out in time.

And somehow that one aerial root we pinned into the hole got pushed out.

Anyway, enough backstory, let’s get to work.

Remove the wire.

Not too badly scarred. And those wire scars on the branches are easily dealt with. You can literally shave them down and they disappear quickly.

That hole I pointed out above is just about filled in. That’s the advantage of unrestricted growth.

Now to defoliate.

There we go, we can see what we have to work with. Which is a lot.

We got lucky with the longer branches just happening to grow just where we need them.

This one is perfect for grafting; strong growth and fresh bark.

It’s gonna go about here, to fill in that empty spot. Now, to explain why we need grafting on a ficus like this: this is the plain Jane, regular old Ficus microcarpa, not one of the many cultivars. Which means that it doesn’t back bud as readily as one would like. In fact, it’s more prone to die back to the next node, or grow point.

The branch just above my pointer finger has been grafted on, and the next one above it as well.

After grafting, here’s the new pot. I debated for about ten minutes whether I should repot or do the top work first. Top work won out. The debate was whether the repot would be to strenuous on the grafts. But I figure I can be gentle.

Grafting time.

A freshly sharpened knife.

And…..here we go!

Grafting is easier than you might think. Simply cut a gouge into the the bark.

Doesn’t even need to be that big.

See?

Grab some type of grafting tape. In this case I’m using “self-amalgamating electrical tape”. I’ve come to use this because it only sticks to itself (self-amalgamating) and doesn’t damage the trees bark when you take it off. The point of the tape is to keep water out. In the past they’ve used beeswax, floral tape, vet wrap, even just cut paste.

Cut a piece..

Remove the backer piece…

Scrape the branch you are grafting, place it, and stretch the tape (it’s rubber), and wrap it tightly. I then like to use wire to hold it down as well.

And make sure the wire is tight. That holds the two pieces together. As the cuts heal, they want to pull away, so I’ve found that wire holds it in place nicely (like we did above on that recalcitrant branch).

On the side that’s holding the graft, two loops hold it down better than one.

Now for one more graft. Same process: cut a wedge…

Scrape the bark on the branch…

Apply the tape, add the wire…

Crank it down.

I was going to wire this tree out but I think I’ll just prune for movement and taper. Making sure to leave an active node so we diminish dieback.

All done with that.

One last thing before I repot, I’m going to smooth out this scar.

I start with a knob cutter…

Then clean it with my knife.

It’ll take a bit to heal, but it should heal.

Now it’s time to repot.

It definitely needs it.

Rake it out.

Unwinding the roots. This one went around the pot twice.

Cut back the long ones…

Rearrange the new ones

And now it’s time for the pot.

The pot is, believe it or not, a high quality Italian bonsai pot. High fired and of good clay.

Of course I tie it down.

Using the wire to hold some roots in place.

And fill it back in with good, well draining soil.

In the above pic, I’m pointing at a root I’ll split like I did in that original post (did you read it? Why not?)

Then some fertilizer.

And weed preventer.

And water it all in.

It’s hard to believe this tree started out with maybe four branches and a top. Especially it being a regular Ficus microcarpa, which isn’t know for much ramification.

But you can do it. You just need to follow the basics: cut it back, wire, let it grow, fertilize, unwire, cut it back, let it grow. Just keep doing that and you slowly build the tree.

It just takes time and work. Stay tuned for updates.

It’s been too long since I’ve attended to this poor tree. And the blog. Sorry to the tree and to my readers. I’ve been busy with client’s trees, planning the Bonsai Societies of Florida 2023 Convention (check it out Here ) and some real challenges in my life.

The tree is a Ficus microcarpa.

You last saw it in this blogpost What is the banyan style?, which was published way back in April 17, 2014. Here’s how it looked then:

Yeah. I know, what happened? Right? I’m supposed to be a professional and all that. Neglect, unchecked growth, a couple of hurricanes and freeze warnings. Accidental uh…drought. Insects, disease, cats, children. Basically it’s survived some biblical trials and tribulations.

Speaking of disease…

I see these spots early in the spring…a lot recently. I had my nursery inspector do some checking and, though I thought it could be a fungus or a bacteria like pseudomonas, he said it’s evidence of a gall wasp. Now, as the name suggests, it’s usually an evident infestation by there being a gall on the leaf, but I haven’t seen them in my ficus. Maybe because of the systemic treatments I use (more on that later) killing the larvae. I don’t know.

The work today in rehabbing this tree will include a repot, a hard cut back, fertilizer, insecticide, and weed prevention.

Let’s get to work.

First, cut back…

I’m bringing it down quite a bit.

Chop chop goes the scissors!

This branch below will be the one branch I don’t cut back. You’ll see why (again) later on in the program.

Normally, I would cut this type of fig back so hard, as this is a standard Ficus microcarpa, and you can get significant dieback on it, sometimes losing whole branches. To contrast this, the Tiger bark microcarpa doesn’t do that so badly, it back buds almost anywhere. But the plain old Ficus microcarpa does. Keep that in mind. Know your tree and work accordingly.

If the branch you’re chopping is a darker brown, it’s more likely to backbud, as that’s newer growth.

Here’s the one branch I didn’t cut back. I wired it and left the grow tip.

Now to repot. I’ll be combing out the roots to get rid of all the wrapping ones. And I’m being aggressive so I can get all the weeds out.

Weeds like these. This is a corm or bulb from a weed called “cat’s claw”. A climbing vine that holds onto things with tendrils and modified appendages that are a lot like, just as the name says, a cat’s claws.

Here you can see the “claw”.

This one is called “Florida spurge”. It’s underground roots can get as big as carrots. You have to be carful to pull out those roots as it will just grow back from the bulb. If you have them it’s a good indication you may have nematodes.

Here’s the leaves of the spurge.

That done, time to cut the roots.

They were circling the pot (it’s in a different pot than the one I used years ago).

The pot it was in.

A good pot. But is it deep enough for what I need for good regrowth?

I had had thoughts of putting it into this container. It’s kind of what the trade calls an “Anderson Flat”.

It’s bigger and deeper than the ceramic one.

But using it might give me too much growth. Is there such a thing? Yeah. I need controlled growth with short internodes (remember the dieback, the branch will dieback to the next node lower on the branch). So I’m going with its current pot.

Here’s an axiom “The wetter the roots stay, the slower the growth”. You’ll hear me talk of wetter and drier soil mixes and, in this case, the more shallow a pot, the wetter the tree will stay.

To repot, first, make a mound of soil, and put the tree onto it and wiggle it down. This fills in the air gaps and gives the roots something to grow into.

It bugs me when I see people spreading an even layer around a pot. Don’t worry about the edges. That’s what chopsticks are for, getting the soil in between the roots on the margins.

The wiggle technique:

All chopsticked in.

Some systemic insecticide next, in this case, imidacloprid. It’ll keep the thrips away. And those gall wasps.

I like to mix it into the roots well, or else you get a gooey mess.

Now, a generous portion of fertilizer. This is half synthetic time release, and half organic (I’m using Miracle Gro Skake ‘n Feed today).

And weed preventer. This is OH2 but you can find a product called “Preen” in all the stores. It’s a convenient product that inhibits seed germination, not an herbicide, so you have to get out all of the sprouted weeds first. And there will be ones you miss, so revisit it in a week or two to get those.

Do you know the difference between a weed and a plant? You want a plant, you don’t want a weed. There are places where Ficus microcarpa is a weed.

And that’s it. Let it grow.

I did rewire a back branch. It was growing up, as they are wanting to do, so I rewired the opposite direction and put it back in the place I wanted it to be. Here’s a tidbit: if you keep a branch wired too long, when you remove the wire, sometimes it pops back into its old position. The tree wants to grow up, especially newer, and smaller branches, so the tree is actually pushing against the wire, and when you unwire it, it pushes the branch up again. You can see this in bigger trees where two branches are growing against each other, and tree trimmers know this and are very cautious when they see it. As they try to chainsaw the branches, the pressure could be so great the branch will violently snap. They call it a widow maker. It happens with twin trunks the most. Imagine you’re sawing away and then “BANG” the tree splits apart at the seam.

With that, the fig has a long way to go, but by the end of the season, I’ll have secondary and tertiary branches to work with. I’ll update if I remember.

And “Bob’s yer uncle”.

Let’s see if I can get it back to its former glory.

Here I am, back in Cincinnati, it’s July, 2023, two years since my last visit, and I find that a tree I had worked and, most assuredly, had killed, was still alive.

Wow…

I’m not a northern conifer guy, generally (but I do work them for clients) so the only thing I can say to what it is, is that it’s some type of spruce (but it could just as easily be a fir or a hemlock). Spruces don’t grow down in Florida. They are what we call a “Christmas tree”.

As I inspect the tree, I find a few issues. Much of the US Midwest had a weird winter. It was cold near Christmas time, but didn’t get cold the rest of the winter, until one day the temps dropped 40° Fahrenheit in a matter of hours. Many bonsai were damaged. I think it stressed this tree in particular.

It killed off one branch (above) and some of the new buds were damaged. As you can see below.

But it’s still alive and growing. Which delighted me when I got to my clients house.

Ok, that’s in the Now. Let’s go back in time and look at the tree two years ago and you can judge me for the initial insults I rained down upon the poor tree back then.

Lots of branches, good color.

Crappy soil.

So what did I do?

I repotted it.

My client, Tom, asked me to, so I, against better judgement, did.

This was in mid June, Cincinnati, Ohio, coming into the hottest time of the year for the locale, I knew just a little of its history, but nothing about the species, and the worst insult? I’m a tropical guy (well, mostly. I am here now, aren’t I?).

Tom, who had a stroke a few years ago, doesn’t get to work his trees so much. And he’d had the tree for many years, just sitting in that pot. He’d look out the window at it from his living room.

He asked me to do something with it, so I did.

First, the repot.

The soil I had on wasn’t the best. Mostly expanded shale, or Haydite, as was the brand name back in the day.

Then I styled it.

Two years ago….

You are probably asking why I didn’t do a write up on it then? Well, to be honest, who wants to show a tree you’ve worked on that you know won’t live? I don’t like that idea, showing techniques and styling and trying to be a teacher when you know it’s not best for the tree.

But I got lucky, and sometimes, as they say, it’s better to be lucky than good.

Here’s the tree after the restyle.

I left more on it this time, given that it was stressed.

Wiring the top in a typical “conifer comb over” many bonsai artists practice.

The only tips or tricks I can give you on this particular variety and species of tree (considering I’m near ignorant as to what it specifically is) is to not cut it back too much, water and fertilize as one would with the spruce genus, and pay attention to severe, sudden drops in temps near springtime bud formation.

I didn’t fertilize this time, except with a miracle product called “Micromax”, which is full of those micronutrients usually missing in most fertilizer compositions (macro nutrients are the NPK of regular ferts: nitrogen, phosphorus, and potassium, micros would be things like molybdenum or boron or even things like chlorine or copper that you might think are detrimental to a plant).

And that’s how I left it for this year. Hopefully I’ll see it again in my future travels. I don’t get to see many trees after I work on them in my tours. So a return this year was sweet.

Thank you Tom, and thank you Ruthie. You are both the real deal.

This ficus has been in this remarkable container for..ahem..four or five years, without a repot. I’m sad to say it needs a bigger pot. Sad because I love the pot and the tree combo.

Today, I’m hanging out, selling my wares and shooting the shit (as I’m known to do) at the Brevard Zoo. No, I’m not joining the swamp ape exhibit as the first living specimen ….

…the Bonsai Society of Brevard has an annual show at the zoo, uh…every year (I guess that’s what “annual” means), and I’m here (or there. Sometime the tenses get mixed up in my wandering and rambling prose style. I think it adds flavor and character. Some people say it drives them crazy. I say to those people that their insanity was there already, and I just exacerbated it, allowing it to blossom into the full blown psychotic episode that they’ve been waiting for their whole lives. You see, some people need an excuse but we of lesser gods, we know you don’t…..).

Above, we have the local fauna, Floridanus nativitus, below, are some imported beasts, Giraffa camelopardalis.

And my wife, or, as we call her on Da’ Blog, “She Who Must Be Obeyed”; she’s from Indiana.

Now, since you know where I am, and what I’m doing, and I’ve gotten in enough trouble with the wife, let’s get back to the tree.

The job is to remove the tree from the pot.

For those “in the know”, it’s really really really (really) advised against potting a ficus in a pot that has an inwardly curving lip.

Ficus (I’m going to pronounce that the British way, “Fick-us”, as I’m feeling all fancy right now), make roots. Lotsa roots.

I have to bring in a highly specialized (and imported) root cutter (and sod cutter too, I guess, if you read the handle. But I just don’t see myself on my knees, my face in the grass, cutting out pieces of sod).

But first, the inevitable cutback and defoliation.

You don’t need to see that part, just scroll back to the hundreds of articles I’ve written and in which I’ve described the process.

I will, however, note that this tree is the species standard Ficus microcarpa. And that means I leave a little green on the tips so there won’t be dieback.

Now to the hard part, removing the tree from the pot. First, cut the tie down wires, on the bottom and top.

Then we start cutting around the pots perimeter.

As shown below.

Not too hard with that tool. I usually use a steak knife (which was stolen from The Sizzler Steakhouse and Buffet) but it’s at home in The Book. The gentleman I’m speaking with is Doug, The Hippie Dad.

Now to birth the tree. Another video. Yes, I’m using my scissors. They worked. I use my scissors for many things I’m not supposed to use them for.

Looks like a tortoise mouth, right? And again, that was Doug. Thanks for the muscles.

The pot was made by Daniel Holderer. He called it “Cradle for Life”.

I’ll find something else to put in in. It’s been a good container for this tree.

Now to rake out the roots.

It’s just a little root bound.

I brought three pots with me to choose from. Two of those antique Japanese pots with the weird green clay, and a beautiful oval from my friend Cesar Labrador.

The oval one’s too small…

….the rectangle one’s about right, but the style is too formal for my “Tropical Broom Style” ficus….

….ahhh, this one is just right!

Some screen, tie down wire….

Soil….

And we are done.

Looks good back on the bench at the nursery.

Tropical Broom Style. I made that up years ago but I think it’s appropriate for this ficus. And everything was made up in the beginning anyway. Whoa! Wait! Mind blown! Right? You mean you can just make up things?

Indeed you can, indeed you can….

Well now, did the story start with scotch? Or end with scotch? It’s kind of hazy looking back now. But I’ll try….wait, I remember…it started with bourbon!

It actually began in 2019, but you didn’t see the tree until 2021, 2 years ago (or, two years from the post, in case you are reading this in the year 3023. It’s now 2023, taking place in the month of July. If you don’t use the word July, it’s the seventh month of the solar year, named for Julias Caesar, the first Roman emperor (or dictator) after abolishing the Roman republic. the Terran summer solstice in the northern hemisphere occurred on June 21, 2023, and this debauchery occurred 28 days later. Terra or Earth, is the third planet from our sun, called Sol, in the Solar System, in the Milky Way Galaxy. Hopefully that’s enough for the far future readers to understand how we told time back in the ancient 21st century days of legend.)

Today , or rather, late July (don’t make me go through that again). We have a ficus microcarpa, what one might call “ginseng”. But that’s just a marketing term. Ginseng are not figs, figs aren’t ginseng. You make Newtons out of figs, and Monsters out of ginseng. The cookie and beverage, that is.

The article this tree first made its debut in was this one, What can you do with a ginseng ficus, Northern edition, a rather wittily written post I might add. Go ahead, peruse it, I’ll wait. I have scotch.

Ok, now that you’re up to speed, let’s get to the work….

I’m in Toledo, or Maumee, to be precise. It’s pronounced just like “mommy” by the locals. I feel a song should be sung. I wanna go back to my Maumee.

I’m with my two good friends, John and Julie. They take care of me when I’m there.

The tree is potted in an aluminum serving container. There were a few who said that we’d be poisoning the tree with the metal tray.

Looking below…

….I’d say, naaah! in fact, it looks good for a ficus in the north. Damn, I mean, it’s almost Canada fer crissakes. They don’t say “Holy Toledo!” for nothing.

Anyway, we did a lot of work that day. But not much on this ficus. We didn’t have a pot, you see. So we decided to get all “Muckety Mucked” up.

24 year…25 year….26 year, or, as the bottle suggests, one little piggy, two little piggies, and three little piggies.

We finished the 24 year. Made a dent in the 25 and 26. Wait, is this a bonsai blog or a drinking blog?!

It’s both. Sometimes.

And to the dead soldiers, we salute you!

The next morning, hangovers and bright lights notwithstanding, we had to get up early to go to Michigan (I know, that sounds like the first line in the “Great American Novel” we writers all would love to write. Maybe…..).

We had to get a decent pot, so we visited the Flower Market (Which has changed its name to Green Witch Gardens)

It’s a damn cool place to visit. Not only do they have bonsai, but there are cats…

…that’s cats, plural.

And pottery from amazing American artists.

The trees!

Julie hiding behind a tree.

Familiar weeds. These are what are called wandering dudes now. I feed them to the tortoises. Speaking of which….

Tortoises!

Only the best bonsai nurseries have tortoises.

We got some pots.

Then went back to Toledo.

And we got back to work.

For being in a shallow aluminum pan, it’s grown some good roots.

The “pot” has even held up well. We could use it again.

Looks solid.

Raking out the roots….

Here’s the new pot we got for the ficus.

Sweet, ain’t it?

Tree is ready

Can I mention again how good the roots are?

We had split some of the larger ones (go back and read the first post).

Hey, it even fits in the new pot.

Damn those are sexy roots. Must be the soil. The vaunted, rare and near mythic “All-American Red, White, and Blue, Adamaskwhy SuperMix” .

Just to prove we did other work, here’s some examples. A willow leaf.

A tigerbark.

An azalea.

A willow leaf root cutting.

And another.

I must say, I can’t believe what an amazing two days that was.

But I had a hard day while I was writing this piece. Something that should not be happening is. And I posted to Facebook; I quoted JRR Tolkien, the part where Frodo asks of Gandalf:

“I wish it need not have happened in my time,” said Frodo.
“So do I,” said Gandalf, “and so do all who live to see such times. But that is not for them to decide. All we have to decide is what to do with the time that is given us.”
J.R.R. Tolkien, The Fellowship of the Ring

And John replied “and what you do happens one word at a time, one leaf at a time, one sunrise at a time.”

Here’s the tree all those years ago. We ground layered it (hence the post title).

One tree at a time. Even if it takes years to bring it to its potential.

One leaf at a time.

One branch.

One root sometimes.

The two years ago..

And now.

Bonsai is a journey. And getting there is sometimes the only reason to go somewhere. You can buy a tree, but making a tree, especially this one, that started so humbly, is way more fun.

John has done well with it. I’m honored to have helped him, and thanks to both John and Julie for letting this strange bonsai guy (me) into their home.

Here’s a tree. Willow leaf fig. Yeah, the one everybody says they can’t decide on a name for. Nerifolia? Salicifolia? Wilowleafyanus? But they did, about ten years ago. “They” being botanists: it’s called Ficus salicaria, which is literally -willow leaf fig. Also, I’ve been writing this post for about six months, and the work was done early spring, before the rainy season in Orlando.

Let’s start with an interesting note on growing the willow leaf ficus outside all year in Orlando. In the spring, if you’ve done no work on them since last summer, they will drop all their leaves and grow new ones within a week, much like a deciduous tree, or, more specifically, like Quercus virginiana, the southern live oak. First time it happened to me I was freaking.

Don’t worry though, the leaf drop may seem pathological (meaning caused by a pathogen or illness) but it’s natural. It quite literally drops its old, winter leaves, which are adapted to the lower light intensity and short light intervals of winter, and grows new ones that are better adapted to the heat, length, and intensity of spring and summer in Florida.

If that sounds familiar to my northern peeps, it’s this process, plus my own experience pruning and moving trees around in my nursery during the Florida Winter, that informed and enriched my own teaching. Mainly, I recommend this technique to my northern students: when moving a tropical tree from outside to inside, or versa vice, inside to outside, defoliate. A tropical tree will drop old leaves instead of trying to change them according to their new environment.

Meaning, outside leaves are not adapted to inside light. Remove them and the tree will grow new, indoor leaves, when it’s inside. And do it again when returning the tree outside.

Works for me, and those students up north who follow the advice.

The pot it’s currently in was made by a friend’s wife, Jean. But it’s too small now.

Jean is an all around artist, and has done theatrical make-up work in movies and even on some of the actors in Star Wars events. You’ve seen her work I’m sure.

She makes a good container too. But it’s time to get a bigger one for the tree.

The tree was acquired from one of the Facebook Bonsai Auction pages. From a former friend named Seth Nelson.

There’s a name that gives me a bitter taste in my mouth. There are very few of my readers and students who’ve heard the story about this kid. Or man by now, I’m thinking.

When I knew him, he was both young in temperament and age. I’m thinking that he has grown up now.

When I first met him, he was looking for a mentor. Unfortunately, that was me for a few short years. I say “unfortunately” on his behalf, not for me.

I can hear it now, “What does that even mean?” Well, this will be hard to write, and I’m not going to be pointing fingers, except back at myself, or trying to persuade you that I’m an angel, because I’m not, but at that time in my life, I was still young and stupid too. I’m not sure I’ve matured.

Let’s work on the tree and I’ll throw in my thoughts. And, Hell, if you don’t want to read it, just look at the pictures. I’m very reluctant to write it.

I guess the ficus has been in this pot for too long. That wire is just a bit cut in. The reality is that I have been thinking about this tree for years and ignoring it at the same time. I knew if I worked on it, I’d have to document the process and then its story had to be told.

The red circle shows the tie-down wire cuts. You gotta tie them down so they don’t get up and walk away.

Seth was selling the tree to help pay for something, I think maybe a starter for his truck. I surprised him by using the BIN option (B.I.N. means “buy it now”). And he brought it to the nursery for me.

Release the chains! The tie down wires

Ah! That, below, is a root. Maybe the tree doesn’t want to be repotted?

It’s in there like the second wicked stepsister’s foot crammed into the glass slipper.

A tad bit of irony, but me having to use a repotting scythe to cut the tree out of the pot, goes with the original Brothers Grimm telling of Cinderella, where the stepsisters cut their foot so it would fit in the slippers (in the original, the slippers were gold, not glass).

Sounds like a lot to do to yourself just so you can be a part of the ruling elite, cutting off pieces of yourself so you fit in.

As you see in the video below, it’s in there tight.

Jeez. Do I have to break the pot?

There’s some ASMR for you.

I got it out, finally.

It has some roots on it alright. Ficus are very good at saving sugars in their root structures (being partially epiphytic is the reason. Most ficus are epiphytes, meaning they can live without soil, usually in a tree as strangler figs, so they’ve adapted by growing tuber-like roots to store carbohydrates and moisture for when they need it. Think of the so-called “ginseng” ficus, looking like a potato with the caudex looking roots. It isn’t a distinct species, but a trade name given to seedling Ficus microcarpa. Almost every species of ficus will do that with their roots).

Some pruning.

A few heavy root cuts.

Now to pot it up.

I have soil, wire, fertilizer, granular systemic insecticide, but one thing I didn’t remember to put in the van this morning was a good pot. I do have a pot made out of mica, from Korea. It’s at least bigger and will serve the purpose.

Needs some more holes for tie-down wires. That’s the great thing about mica pots, they are good containers, and they can be easily modified however you want. One of these days I’m going to carve a design into one.

Now we are cooking with gas.

Some soil. Soil, that’s how it started; Funny story, I’d been in a casual conversation with Seth, and he saw a post of mine where I was repotting, and he asked where I got the red lava. He’d been buying the consumer grade and mulch sized red lava they sold at Home Depot, and was trying to use a hammer to crush it down to bonsai sized (about 1/4 inch size) and discovered that it just makes dust. It’s hard to crush lava with a hammer. I told him that I was going to be at a bonsai club meeting that met close to where he lived, and I’d bring him some of mine.

It was a good way to get a meeting with me. I like to help people, and Seth figured it out.

Fast forward a year or so to when I first got the tree from him, he thought I was going to do the famous Adamaskwhy trunk chop.

I didn’t, but instead decided to use all the branches to make it work. For some reason, he wanted a chop, so he was disappointed. It wasn’t the last time I disappointed him.

I said earlier I was young and stupid. When I met Seth, it was just around the time I began my journey with an ileostomy. There’s even a blog post where I go into the hospital after I visit him and he was one of the only people to come and visit me (Click here). I was angry at the world and I tend not to suffer fools gladly (I still don’t, but I’m getting better, now I just suffer them stoically). Seth had a hard time with his stepfather at home and we both would commiserate by saying bad things about people we didn’t like.

And here is where I couldn’t live up to my ideals. I have a flair for writing well, and he and I would DM each other on FB messenger. That made for some interesting screenshots. But I have come to the realization that, even though he shared private messages between he and I, two good friends, it was still my fault that I wrote those messages.

But I think I’ve grown. I question myself and my motivations often. Like Plato said, “The unexamined life is not worth living”. I also try to align my life with the idea that a meaningful life is one dedicated to beauty, truth, and virtue. And when it comes to my interactions with other people, I know that I can’t ever figure out why other people do things, only why I do things. And it could be argued that I don’t have a right to know another’s thoughts, only to deal with those actions. It’s entirely possible that how they act is really a reaction to how I am acting.

Before styling:

After styling.

Eagles-eye view.

It is a complex tree. You really have to watch the video to see the depth of the trunk movements.

It’s a good tree, and I’ll cherish it for what it represented, a friendship. One I’ll never have again with Seth. I did wrong and I’m sure I’ll never be forgiven, but that’s ok. I’m close to forgiving myself, but I’m not sure I can forget.

I’ll just keep talking to my trees, and be guarded with people. I’m not sure how else to be and not hurt or be hurt. The trees, though it’s a difficult language, still speak in plain sentences.